Trailed Proper Topper

The Proven Pasture Topper...

Improve your pasture and increase production with regular topping of paddocks. The growing of sound pasture and its maintenance is clearly the most important requirement of the farm/stud manager.

Dairy farmers are aware that increased milk production
is achieved by a regular pattern of grazing, topping
and irrigation.

The Trailed Proper Topper cutting height control is
set by drawbar adjustment and ‘adjustable depth stop’
fitted to master phased hydraulic cylinder.

The drawbar is height adjustable and the wide angle
PTO shaft allows for tight turning with full PTO power
to Topper.

Created & Engineered by CGE in 1989.

Operating Performance
•	Suction uplift and clean cutting of the wheel mark (in after cow topping)
•	Even spread of cut material behind Proper Topper – no windrows
•	Sharp clean cut, no bruising
•	Reduced level of debris travelling forward
•	High speed cutting in a variety of pastures
•	Non-bulldozing hardened steel skid forms
•	Height adjustable sides provide protection for crossing check banks

Standard Features
•	Available sizes: 3mt (10ft) & 3.6mt (12ft)
•	10ft model: 130hp driveline @ 540 PTO
•	12ft model: 200hp driveline @ 1000 PTO
•	Comer wide angle C/V PTO shaft & 4 plate clutch
•	6mm folded deck plate - easy clean
•	Height adjustable drawbar by threaded adjuster
•	Height adjustable 8mm side plates with secure ‘lock & dog’ height adjustor and fitted with 100 x 12mm hardened steel skids
•	Hinged rear safety debris shields, manual actuation

Complimenting Options
•	Upgraded wheel assemblies to 18 ply stubble tyres
•	Dual mulching blades

A.F. Gason Pty Ltd reserve the right to change design, price and specifications without notice.