VHD Taper Back 3PL Single Rotor Slasher

Designed for tight working conditions...

VHD Taper Back Single Rotor Slasher is designed for tractors from 70 PTO HP and tight working conditions, mitred rear corners reduce the turning arc when around trees, fences & posts.

PTO HP recommendation is subject to compatible tractor specifications.

Body and headstock design and material is similar to
specifications for standard model VHD Slashers.

Driveline componentry, deck construction & wear points are reflective of the VHD description and are easily serviceable and designed to match tractor and workload.

Gason-CGE Mowers & Slashers comply with current
“Slashers – A guide to Health & Safety Standards
February 2011” guidelines.

Standard Features
•	6mm deck plate material
•	One-piece 8mm plate headstock
•	8mm height adjustable side plates
•	100mm x 12mm spring steel skids
•	Heavy-spring steel spinner assembly

Gearbox
•	Comer 130hp (@540 PTO)
•	Comer T80 series PTO drive shaft and 4 plate clutch
•	Over-run device fitted
•	Designed to match tractors from 70 to 120hp

Blades
•	Gason-CGE own suction uplift, down-stepped 100 x 14mm, swing back on hardened steel bushes

Complimenting Options
•	Twin 360 degree economy rear castor wheel assembly, height control by screw bar adjuster, wheels fitted are 400 x 100 laminated tyre assemblies (2)
•	Single 360 degree economy rear castor wheel assembly, height control by screw bar adjuster, wheel fitted is 400 x 100 laminated tyre assemblies (1)
•	Heavy-duty single kingpin castor wheel, fitted with (1) 6.00 x 9 puncture proof wheel assembly, adjustable king pin for vertical alignment, screw bar adjuster for cutting height control
•	220mm diameter height adjustable rear roller, domed ends and 50mm diameter solid bar full width axle, large self align bearings. Screw bar adjuster for cutting height control

Available Cutting Width
•	1.82mt

A.F. Gason Pty Ltd reserve the right to change design, price and specifications without notice.